In the last two weeks I have encountered clients with mold issues. Mold is a major problem due to its lack of smell, it's usually hidden and hard to recognize before it's to late. Basements, crawl spaces, behind appliances that deal with water fridge, dishwasher and washing machines is where is starts and than spreads - read below to see what you can do to requonize, prevent or address and most important call North Shore Contractor Management to review all the sources and address if your home is under attack.
How do you know mold is present?
Mold is a major-league nuisance. It blackens the grout lines in your shower, discolors drywall, shows up as black spots on siding, darkens decks, and grows on and rots damp wood everywhere. Even worse, it can be bad for your health. Molds produce and release millions of spores small enough to be air-, water-, or insect-borne. They can also produce toxic agents known as mycotoxins. Spores and mycotoxins can have massive negative effects on human health. For those people who are affected by mold exposures there can be a wide variation in how they react. People at greatest risk of health effects are individuals with allergies, asthma, sinusitis, or other respiratory conditions, as well as infants and children, elderly people, and pregnant women. In addition, individuals with a weakened immune system are at risk.
Remember this -
Almost every home gets mold infestations. The trick is to stop them before they get big and harm both you and your home. In my blog post today I'll explain you how to identify mold and eliminate the small infestations as well as the big ones that have gotten out of hand.
You can easily remove minor mold with ordinary household cleaning products. But be careful disturbing big infestations can be bad for your health, particularly if you are an allergy sufferer or have a weakened immune system. Professionals are needed to eliminate areas over 32 square ft. (Full board of Sheetrock) When you discover an extensive mold problem, we recommend that you use the rigorous protective measures or more efficient consider calling in a North Shore Contractor Management to handle the problem to keep the mold from spreading throughout your house. We will identify the areas, remove the mold, protect areas that have tendency for future infestation and ascetically correct the walls if needed
CAUTION! PLEASE READ THIS PART!
A few types of mold are highly toxic. If you have an allergic reaction to mold or a heavy infestation inside your home, North Shore has professionals to analyze the types that are surface nuisance vs health impacting types
Step 2: How to identify mold
Mold is everywhere. It's a type of fungus that grows from tiny spores that float in the air. It can grow almost anywhere that spores land and find moisture and a comfortable temperature, between 40 and 100 degrees F. Typically that includes about every damp place in your home.
You can easily spot the most visible type of mold, called mildew, which begins as tiny, usually black spots but often grows into larger colonies. It's the black stuff you see in the grout lines in your shower, on damp walls, and outdoors on the surfaces of deck boards and painted siding, especially in damp and shady areas. A mildewed surface is often difficult to distinguish from a dirty one. To test for mildew, simply dab a few drops of household bleach on the blackened area. If it lightens after one to two minutes, you have mildew. If the area remains dark, you probably have dirt.
Mildew is a surface type of mold that won't damage your home's structure. But other types of mold cause rot. Probe the suspect area with a screwdriver or other sharp tool
If the wood is soft or crumbles, the fungi have taken hold and rot has begun. Structural walls have crumbled due to the mold saturating the
framing. Rarely does this happen but don't let a small issue become bigger but not having skilled eyes addressing the problem.
If you have a high concentration of mold, you may smell it. If you detect the typical musty odor, check for mold on damp carpets, damp walls, damp crawlspaces and wet wood under your floors, wet roof sheathing and other damp areas. Clean up these infestations right away before they get worse - water leaking under carpet, dogs or cats peeing in a corner of a house can allow mold to grow unnoticed leading to removal of flooring and sub- flooring. A costly project that can avoided.
Step 3: Removing large infestations requires precautions—and work!
Cut stained or musty carpet and pads into 6 x 8-ft. sections with a utility knife. Using a pump sprayer, mist the surfaces with water to control the spread of spores, and roll up the sections. Double-wrap them in 6-mil plastic and tape them with duct tape for disposal. Wear protective clothing and run an exhaust fan in the window.
You can scrub away the surface mold common to bathrooms, decks and siding in a matter of minutes with a 1-to-8 bleach/water solution. But often mold grows and spreads in places you don't notice, until you spot surface staining, feel mushy drywall or detect that musty smell.
If you have to remove mold concentrations covering more than a few square feet, where the musty odor is strong or where you find extensive water damage, we recommend that you take special precautions. You want to not only avoid contaminating the rest of the house but also protect yourself from breathing high concentrations of spores and VOCs.
Do you want to do this on your weekend? Do you want to have to put the risk of your families health in your amateur hands and back? Having North Shore Contractor Management bring in labor to professional inspect, remove and clean up an area while your out of the house at the movies and lunch. A sound construction decision but if your going to go at it alone or with a great friend please review the checklist below
* Wear old clothes and shoes that you can launder or throw away after the cleanup work.
* Wear special N-95 or P-100 respirators, in addition to goggles and gloves.
* Set an old box fan or a cheap new one in a window to ventilate the room while working. Throw it out when you're done cleaning, because the spores are almost impossible to clean off. Tape plywood or cardboard around the window openings so the spores can't blow back in
* Wrap and tape moldy carpeting in 6-mil plastic, and double-bag mold-infested debris in garbage bags for disposal.
* To control airborne spores, moisten moldy areas with a garden sprayer while you work
* Turn off your furnace and air conditioner and cover ducts and doors to contain spores.
* Keep your wet/dry vacuum outside when you vacuum
Moisture damage and large mold infestations go hand in hand.
If you live in a home with old leaky window where wind-driven rain frequently got into the wall and gave mold a foothold.
You have to open up the wall to get at the mold growing inside Since you have to repair the wall anyway, don't hesitate to cut the drywall back beyond the obvious damage to find all the mold and let the wall dry out. To avoid cutting electrical wires, poke a hole through the damaged section and locate the wires first. Turn off the power to the outlets before you cut.
Our remediation contractors and carpenters/painters can make that wall good as new.
If the moisture damage has been neglected or gone unnoticed for long, you're likely to find rot. Where possible, remove and replace soft, spongy studs and wall sheathing. Where removal is difficult, treat the affected areas with a wood preservative (available at home centers), after cleaning the wood and allowing it to dry. Then double up rotted members with pressure-treated wood.
Think of all the money and time you need to invest when North Shore Contractor Management can price and address work in 24 hours.
Tips for Mold Prevention
The key to stopping most mold is to control dampness. The worst infestations usually occur in damp crawlspaces, in attics and walls where water has leaked in from the outside, and in basements with poor foundation drainage. Stopping leaks, ensuring good ventilation in attics, keeping crawlspaces dry and routing water away from the foundation are the best defenses.
Mildewcide in paint is usually effective for controlling surface mold in damp rooms like bathrooms and outside in shady areas. Many paints already have mildewcide in them. Check with your paint dealer to be sure. You can add mildewcide, although you might void the paint warranty.
Step 4: Cleanup and removal Vacuum up moldy debris with a standard wet/dry vacuum. Buy an extra length of hose and run it out the window so you can keep the vacuum outside to avoid further spore spread.
Complete the initial cleanup by vacuuming up the debris Thoroughly clean the wet/dry vac afterward by disposing of the filter and washing out the tank, hose and attachments with the bleach-and-water solution.
After scrubbing the surfaces (Photo 6), simply allow the bleach solution to continue to penetrate the surfaces and dry. Wash concrete floors with TSP, automatic dishwasher detergent or a chlorinated cleaner such as Comet.
Set out dehumidifiers and new fans to dry the now-cleaned areas for at least three days, then check them (by sight and smell) for mold. If you discover more mold, clean again with bleach.
When you're sure the mold has been eliminated, seal the wood surfaces with pigmented shellac like BIN or an oil-based primer like KILZ. Repaint cleaned wall surfaces with a regular latex paint that contains a mildewcide to help stop future mold growth. And keep in mind that if the moisture returns, mold will return.
Techniques for Cleaning Surface Mold
Surface molds grow in just about any damp location, such as the grout lines of a ceramic tiled shower. They're easy to scrub away with a mixture of 1/2 cup bleach, 1 qt. water and a little detergent. The bleach in the cleaning mixture kills the mold, and the detergent helps lift it off the surface so you can rinse it away so it won’t return as fast. You can also buy a mildew cleaner at hardware stores, paint stores and most home centers.
Even for simple cleaning, protect yourself from contact with mold and the bleach solution by wearing a long-sleeve shirt and long pants as well as plastic or rubber gloves and goggles.
If the mold doesn’t disappear after light scrubbing, reapply the cleaning mix and let it sit for a minute or two. Then lightly scrub again.
Seal the clean surfaces when they're thoroughly dry to slow future moisture penetration. Apply a grout sealer (available at tile shops and home centers) to tile joints.
Removing surface mold
CAUTION!
Don't mix ammonia or any detergent containing ammonia with bleach. The combination forms a poisonous gas.
Back to Top
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
* Drywall saw
* Safety glasses
* Shop vacuum
* Paintbrush
* Utility knife
Window fan
Rubber gloves
N-95 respirator
Scrub brush
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.
* 6 mil plastic garbage bags
* Painters tape
* Plastic sheeting
* Bleach
* Heavy-duty cleaner
* Shellac- or oil-based primer
This was a long one. I hope it helped and please dont be afraid to call, be afraid not to call
6318384362 Stu